Ads by Priyotunes- pAds

Download audios, videos and many more

Ads by Priyotunes- pAds

Download audios, videos and many more

প্রিয়টিউনস টিউনার 2

210 টিউন

প্রিয়টিউনস প্রিয়টিউনস 2
কিভাবে LG G3 (Sprint LGLS990) তে Stock/Official ROM ফ্লাশ করা যায়!

4 মাস, 3 সপ্তাহ, 1 দিন, 23 ঘন্টা, 30 মিনিট আগে :: 13 January, 2017 05:42 PM

...

Sponsored Tunes Ads by Priyotunes- pAds

কিভাবে LG G3 (Sprint LGLS990) তে Stock/Official ROM ফ্লাশ করা যায়!

টিউন করেছেন : প্রিয়টিউনস টিউনার 2 | প্রকাশিত হয়েছে : 4 মাস, 3 সপ্তাহ, 1 দিন, 23 ঘন্টা, 30 মিনিট আগে :: 13 January, 2017 05:42 PM | |

Ads by Priyotunes- pAds

Download audios, videos and many more


LGLS990

LG G3 Sprint LGLS990

এখানে Sprint এর LG G3 (LGLS990) CDMA স্মার্ট ফোনকে Stock/Official ROM এ ফিরিয়ে নেয়ার পদ্ধতি দেয়া হলঃ

 

প্রথমেই বলা দরকার, আমি এখানে অনেক ফোরাম সদস্যদের কাছ থেকে শুধু সহায়িকার / টিপস জড়ো করে উপস্তাপন করার প্রয়াস চালাচ্ছি, যা LS990 ব্যবহারকারীরা সহজে তাদের  ফোন পুনরুদ্ধার করতে পারবে।

আমরা সবাই এখানে পরস্পরকে সাহায্য করছি, তাই যদি আমি কোন ভুল করি আমাকে ক্ষমা সুন্দর দৃষ্টিতে দেখবেন এবং পরিষ্কার ভাবে জিজ্ঞেস করবেন।

LG G3 (LGLS990) CDMA স্মার্ট ফোন কে  Stock/Official ROM এ ফ্ল্যাশ করলে এটাকে  root করা, CDMA কে  GSM ফোন এ পরিণত করা, অনেক প্রকারের  Custom ROM  ব্যবহার করা খুব সহজ হয়ে যায়।

এখন আসুন শুরু করা যাক :

Prerequisites

  • Sprint LG G3 (LS990)
  • Windows 7/8
  • LG Drivers (Links will be below)
  • Sprint LG G3 stock .tot file (Links will be below)
  • Sprint DLL file for LG Flash Tool (Links will be below)
  • LG Flash Tool (Links will be below)
  • A good/reliable USB cable
  • Backup your data! This will format your internal storage, including user apps, SMS/MMS, Call Logs, Pictures etc. So please backup your data

Downloads

  1. Sprint LG G3 Stock LS990ZV4 .tot file
  2. Sprint LG G3 DLL File
  3. LG Drivers
  4. LG Flash Tool

Steps

  • Download all files/zips above
  • Double click on the LGUnitedMobile exe to install the drivers
  • Extract the Setup_LGFlashTool.zip and double click on the exe inside the extracted folder to install the LG Flash Tool (note: make sure you don’t choose a custom directory and that it installs to C:\LG\LGFlashTool)
  • Inside the extracted LG Flash Tool folder (where the exe is) there is a file called “MegaLock.dll”. Copy this file and paste it in the C:\LG\LGFlashTool directory (overriding the current MegaLock.dll file)
  • If your phone is still working (and not in a bootloop or perpetually off) plug it in to your computer and let the installation of the LG Drivers finish (if your phone is in a bootloop or it won’t turn off it shouldn’t be a big deal)
  • Unplug your phone from your computer then turn off your phone
  • While its turning off you can open up the LG Flash Tool program (if no desktop icon was created for the program just do a search for it within your installed apps or browse for it from the start menu). You can open it with the default setting (Korea Factory)
  • Once your phone is completely powered off press and hold the Volume Up button and reconnect the phone to your computer via the USB while still holding the Volume Up button until you enter Download Mode (it will look like this)
  • Once you’re in download mode let go of the Volume Up button and wait for the drivers to install on your computer
  • Once the drivers have finished installing navigate to your desktop and right-click on your Computer (or This PC) icon and select “Manage” (or do a search for “Device Manager”)
  • In the Computer Manager screen select “Device Manager” then select Ports
  • Look for the LGE AndroidNet USB Serial Port (COM#) (where # just means whichever port is was installed to. Ex: (COM3)). Double Click on this and select “Port Settings”
  • Next, select “Advanced” then change the COM Port Number to COM41. Once COM41 is selected click OK, then OK again to save your settings. Now your Device Manager should have refreshed and the LGE AndroidNet USB Serial Port should have changed to (COM41). Exit out of Device Manager/Computer Manager.
  • Navigate to wherever you downloaded the LGLS990_20140704_LGFLASHv160_Download.zip and extract the zip.
  • Back in the LG Flash Tool Program the Model Config screen should be open. Select “Manual Mode”. Right below it select the LGLS990_20140704_LGFLASHv160.dll you extracted for the DLL selection (navigate to wherever you extracted it)
  • After that select “Add” (immediately after the DLL selection option) and select the LS990ZV4_04.51101.tot file (navigate to wherever you downloaded it)
  • Now, navigate to Action Mode section and select Board DL. Click OK, then click the yellow arrow in the top left corner
  • After you click the yellow arrow (start) button the LG Flash Tool begins examining the DLL and tot file you selected. IF everything went OK after a little wait you’ll see a “READY!!” prompt under the COM41 Port.
  • Once you see “READY!!” sign unplug your phone from the USB, wait 5 seconds, then plug your phone back into the USB
  • After you reconnected your device you’ll notice the flashing process begins as indicated by the progress bar. It could take a while so just hang tight and keep an eye on the progress
  • Sometimes the LG Flash Tool will not show 100% progress but will successfully flash the firmware so keep an eye on your phone
  • Once the flash is finished (either indicated by 100% progress or the PASS sign that pops up) your phone will begin to reboot into the AAT Mini OS Screen. Once at the screen hold onto the power button and select “OK”, then select the “normal boot (+power)” option
  • After that selection is made your phone should reboot normally
  • Sign into everything and let your phone settle for a few minutes. Then, restart the phone

আশা করি, মনোযোগ দিয়ে সাহস নিয়ে উপরের ধাপগুলো অনুসরণ করে সফল হতে পারবেন।

অগ্রিম ধন্যবাদ

টিউনটি সংগ্রহ করা হয়েছে টেকটিউনস থেকে। টিউনটি লিখেছেন deadlock

প্রিয় টিউনসে যুক্ত কর

নির্বাচিতটিউন মনোনয়ন


Leave a Reply

Your email address will not be published. Required fields are marked *